About DataExplorer
With DataEplorer you are able to analyse your log data mobile. It is not a must, but most of the supported file formats are coming from logging devices or telemetry log files generated by radio controlled model sports....
With DataEplorer you are able to analyse your log data mobile. It is not a must, but most of the supported file formats are coming from logging devices or telemetry log files generated by radio controlled model sports. Import data log files is supported from already loaded files from your local device storage, extended local storage, cloud storage and USB attached storage. If the device writing log files to a SD-Card it can be attached right away if your mobile device is supporting this.
Data curves can be displayed and configured. Data set comment can be edited to note important events. In case of GPS coordinates availability the corresponding track can be draw using different backgrounds. Curve and maps view allow zooming and a lot of personalisation and configuration. A short help instructions will explain the main functions.
The DataExplorer for Android version is constrained to a single data set in respect of the lower overall resource power provided by mobile computers, like smartphone or tablets. Saved OSD-files can be exchanged between DataExplorer versions. National languages English, Frensh and German are actually available.
Actual supported import data are coming from following devices:
Core-Telemetry (PowerBox) - telemetry data analysis (attention: file multi selection required)
DataVario (WStech) variometer, GPS, multi measurement device
DataVarioDuo (WStech) variometer, GPS, multi measurement device
FlightRecorder (Multiplex) telemetry data logger
Futaba-Telemetry (Robbe/Futaba) telemetry data analyze
GPS-Logger (SM-Modellbau) - GPS, multi measurement device
GPS-Logger2 (SM-Modellbau) - GPS, multi measurement device
GPS-Logger3 (SM-Modellbau) - GPS, multi measurement device
GPXAdapter GPS Exchange Format file analyzer, extensions prepared for Mikrokopter
HoTTAdapter2/3 (Graupner) receiver-, vario-, GPS-, GAM-, EAM-, ESC-sensor module telemetry data
HoTTViewer (Graupner) telemetry data gathered by HoTT Viewer or HoTT Viewer2
iCharger X6 (Junsi) load of CSV charge curves
iCharger X8 (Junsi) load of CSV charge curves
iCharger DX6 (Junsi) load of CSV charge curves
iCharger DX8 (Junsi) load of CSV charge curves
iCharger 308DUO (Junsi) load of CSV charge curves
iCharger 406DUO (Junsi) load of CSV charge curves
iCharger 4010DUO (Junsi) load of CSV charge curves
IGCAdapter (OnLine Contest/International Gliding Commission) file analyzer
IISI Cockpit V2 (Isler) telemetry data analyze
JetiAdapter (Jeti, Jeti-Box) multi sensor telemetry data log
JLog2 (SM-Modellbau) - Kontronik Jive/Castle motor driver logger
Kosmik (Kontronik) motor driver analyze
LinkVario (WStech) variometer, GPS, multi measurement device
LinkVarioDuo (WStech) variometer, GPS, multi measurement device
NMEA-Adapter (diverse) - GPS track analyzer
OpenTx-Telemetry (OpenTx) - telemetry data analysis
Picolario2 (Renschler) - variometer
S32/JLog3 (R2Prototyping) - ESC analyzer
UniLog2 (SM-Modellbau) multi measurement device
PrivacyNotice: The DataExplorer app does not use or transfer personal data to third parties. The DataExplorer app processes log files from the selected device, possibly with position data obtainedf romcontained GPS coordinates to display the path. The log files depend on the selected device and can be in readable text form or binary files. These log files are read and prepared for display. The read/write access to internal and external memory is used to store self created records in DataExplorer's own OSD format and to read own device log files.
Previous Versions
Here you can find the changelog of DataExplorer since it was posted on our website on 2019-10-25 13:06:27.
The latest version is 1.6.8 and it was updated on 2024-04-22 13:27:04. See below the changes in each version.
DataExplorer version 1.6.8
Updated At: 2023-12-04
Changes: IGCAdapter correct acceptance of speed record, sync with GDE code
HoTTAdapter2 add support importing ESC1...ESC4
OpenTx refine data parsing
DataExplorer version 1.6.7
Updated At: 2023-07-10
Changes: IGCAdapter support up to 7 extension values
IGCAdapter tolerate big time step once if follow on time step smaller 2 sec
DataExplorer version 1.6.6
Updated At: 2023-02-14
Changes: HoTTAdapter* reverse channel lost packages calculation correction
HoTTAdapter2/3 support ASCII log import (MZ-16/32)
HoTTAdapter2/3 correct several factor errors
DataExplorer version 1.5.4
Updated At: 2022-03-08
Changes: add PowerBox Core telemetry log analysis (multi-select log files)
add OpenTx telemetry log analysis (two step analysis)
DataExplorer version 1.4.9
Updated At: 2021-07-05
Changes: GPS-Logger* fix latitude/longitude unit
GPS-Logger* add measurements glide ratios and speed glide ratios
GPS-Logger2/3 add additional measurements > = firmware 1.26
GPXAdapter fix import capability using file stream
Futaba-Telemetrie fix mapping file export
DataExplorer version 1.4.8
Updated At: 2021-05-18
Changes: fix potential NPE in updatehandler
HoTTAdapter2, fix scale synchronization, formatting, unit and factor to support different GPS data source
HoTTAdapter2
- fix missing GAM, EAM, ESC parsing
- parsing North/South hemisphere, as well as East/West of meridian corrected
- correct offset MSL altitude if contained in GPS in *.log
- correct factor home direction, enable translation for HomeDirection
DataExplorer version 1.4.7
Updated At: 2021-03-29
Changes: fix iCharger energy calculation
add support iCharger S6, X12
HoTTAdapter2 detecting GPS type to sort and name values
DataExplorer version 1.4.6
Updated At: 2021-02-22
Changes: add support for ZeroAdapter (LogView)
fix loading OSD file IGCAdapter
fix Kosmik device properties
fix S32 import capability
fix GeniusWizard import
fix possible error map background
DataExplorer version 1.4.5
Updated At: 2021-01-18
Changes: update HoTTAdapter2 handling missing GPS values
correct some scale synchronization references
DataExplorer version 1.4.4
Updated At: 2021-01-09
Changes: Copyright Update
Disclaimer
Official Google Play Link
We do not host DataExplorer on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for DataExplorer is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
